Login / Register
Add a review
Log in
Sign UP
[bws_google_captcha]

Bitcoin Robot is a trading robot for MT5. It takes into account the trend, support/resistance levels, determines the pivot points, the speed and acceleration of price changes.

It works around the clock, completely in automatic mode and does not require any special settings .

For deposit insurance, the following conditions are provided:  Stop Losses (SL) of 4 types:

1. Virtual Stop Loss by points, when the lot is not increased. Triggered when the price moves in the opposite direction. Then the position will be closed at a certain level.

2. Virtual Stop Loss by pointswhen the lot is increased. Triggered when the price moves in the opposite direction after increasing the lot.

3. Virtual Stop Loss by time. If the position is not closed within 10 days, it is forcibly closed.

4. Physical Stop Loss, triggered in force majeure situations, as well as when there is no connection with the broker’s server. The size of the SL is determined by the “Drawdown” parameter.

*** For take profit, a virtual trailing stop also works. At some point there is a transition of the position to breakeven.

To select the operating mode, there are the following instroments right on the chart:

ON/OFF-button for turning the robot on and off. When OFF-it will work, but will not make a transaction.

Risk: the Level of risk: 1-Very Low,  2-Low,  3-Medium,  4-High,  5-Extremal.

Drawdown is a physical Stop Loss, % of the balance (drawdown on funds), at which the position is closed.

Close-Closes the position of the corresponding symbol.

 The graph shows some information lines:

Lot – The minimum lot for opening an order. It is determined automatically, depending on the selected risk and the size of the balance.

V = xxx(Vmax) – Indicates the current rate of price change (xxx), taking into account the acceleration. Vmax – maximum speed. When the current speed is higher than Vmax, the order is not opened.

 EVENT: specifies the next action. The following events are available:  “Opening an order” , “Closing by TP”,  “Lot increase”,  “Closing by TP(Incr)”, “Closing by SL”. 

Level = xxx(Lmax)-xxx – the current level, Lmax-the maximum level for the breakdown. When the current level exceeds Lmax, an event occurs that shows EVENT.

Entry % = xxx(Pmax) – xxx-the current percentage of the reversal from the level. Pmax is the maximum percentage. When the current percentage exceeds the Pmax value, an event occurs that shows EVENT.

Bitcoin Robot trades mainly on BTCUSD, as well as on all currency pairs, all trading accounts, and all time frames.

I recommend using it for BTCUSD and EURUSD.

For large accounts, I recommend using the risk mode 1-Very Low.

The minimum Deposit is $500, it is recommended that $2000 and above.  

Leverage of 1: 25 – 1: 500. For small deposits of 1:500 and above. 

The robot can simultaneously work up to 10-12 and above currency pairs.

To find profitable currency pairs, you need to test the robot in the “All symbols selected in MarketWatch” mode, in the “Every tick based on real ticks“mode.

With the goal of security, there is a limit on the number of simultaneously open positions, for the mode Very Low: 5-6, Low:4-5, Medium: 3-4, High: 2-3, Extreme: 1-2

The lot is not automatically increased if the Margin Level is below 2000% .

All control buttons are shown in screenshot 1

If there are open orders on MT5 and to transfer the account to another MT5 terminal, before installing the robot, you need to copy all the files from the old “Files” folder to the new “Files” folder.

The folder is located here: Open menu “File” – > “Open Data Folder” – > > “MQL5” – > > > “Files” ->>>> . . . . (for example “EURUSD. btc” . . . )

In these files (.btc) stores the previous state of the individual pairs.

 

Author

Petros Shatakhtsyan is an expert in the development of automated trading systems with more than a decade of experience in the Forex market.

[spoiler title=”Read More…”]

Bitcoin Robot is a trading robot for MT5. It takes into account the trend, support/resistance levels, determines the pivot points, the speed and acceleration of price changes.

It works around the clock, completely in automatic mode and does not require any special settings .

For deposit insurance, the following conditions are provided:  Stop Losses (SL) of 4 types:

1. Virtual Stop Loss by points, when the lot is not increased. Triggered when the price moves in the opposite direction. Then the position will be closed at a certain level.

2. Virtual Stop Loss by pointswhen the lot is increased. Triggered when the price moves in the opposite direction after increasing the lot.

3. Virtual Stop Loss by time. If the position is not closed within 10 days, it is forcibly closed.

4. Physical Stop Loss, triggered in force majeure situations, as well as when there is no connection with the broker’s server. The size of the SL is determined by the “Drawdown” parameter.

*** For take profit, a virtual trailing stop also works. At some point there is a transition of the position to breakeven.

To select the operating mode, there are the following instroments right on the chart:

ON/OFF-button for turning the robot on and off. When OFF-it will work, but will not make a transaction.

Risk: the Level of risk: 1-Very Low,  2-Low,  3-Medium,  4-High,  5-Extremal.

Drawdown is a physical Stop Loss, % of the balance (drawdown on funds), at which the position is closed.

Close-Closes the position of the corresponding symbol.

 The graph shows some information lines:

Lot – The minimum lot for opening an order. It is determined automatically, depending on the selected risk and the size of the balance.

V = xxx(Vmax) – Indicates the current rate of price change (xxx), taking into account the acceleration. Vmax – maximum speed. When the current speed is higher than Vmax, the order is not opened.

 EVENT: specifies the next action. The following events are available:  “Opening an order” , “Closing by TP”,  “Lot increase”,  “Closing by TP(Incr)”, “Closing by SL”. 

Level = xxx(Lmax)-xxx – the current level, Lmax-the maximum level for the breakdown. When the current level exceeds Lmax, an event occurs that shows EVENT.

Entry % = xxx(Pmax) – xxx-the current percentage of the reversal from the level. Pmax is the maximum percentage. When the current percentage exceeds the Pmax value, an event occurs that shows EVENT.

Bitcoin Robot trades mainly on BTCUSD, as well as on all currency pairs, all trading accounts, and all time frames.

I recommend using it for BTCUSD and EURUSD.

For large accounts, I recommend using the risk mode 1-Very Low.

The minimum Deposit is $500, it is recommended that $2000 and above.  

Leverage of 1: 25 – 1: 500. For small deposits of 1:500 and above. 

The robot can simultaneously work up to 10-12 and above currency pairs.

To find profitable currency pairs, you need to test the robot in the “All symbols selected in MarketWatch” mode, in the “Every tick based on real ticks“mode.

With the goal of security, there is a limit on the number of simultaneously open positions, for the mode Very Low: 5-6, Low:4-5, Medium: 3-4, High: 2-3, Extreme: 1-2

The lot is not automatically increased if the Margin Level is below 2000% .

All control buttons are shown in screenshot 1

If there are open orders on MT5 and to transfer the account to another MT5 terminal, before installing the robot, you need to copy all the files from the old “Files” folder to the new “Files” folder.

The folder is located here: Open menu “File” – > “Open Data Folder” – > > “MQL5” – > > > “Files” ->>>> . . . . (for example “EURUSD. btc” . . . )

In these files (.btc) stores the previous state of the individual pairs.

 

Author

Petros Shatakhtsyan is an expert in the development of automated trading systems with more than a decade of experience in the Forex market.

Bitcoin Robot is a trading robot for MT5. It takes into account the trend, support/resistance levels, determines the pivot points, the speed and acceleration of price changes.

It works around the clock, completely in automatic mode and does not require any special settings .

For deposit insurance, the following conditions are provided:  Stop Losses (SL) of 4 types:

1. Virtual Stop Loss by points, when the lot is not increased. Triggered when the price moves in the opposite direction. Then the position will be closed at a certain level.

2. Virtual Stop Loss by pointswhen the lot is increased. Triggered when the price moves in the opposite direction after increasing the lot.

3. Virtual Stop Loss by time. If the position is not closed within 10 days, it is forcibly closed.

4. Physical Stop Loss, triggered in force majeure situations, as well as when there is no connection with the broker’s server. The size of the SL is determined by the “Drawdown” parameter.

*** For take profit, a virtual trailing stop also works. At some point there is a transition of the position to breakeven.

To select the operating mode, there are the following instroments right on the chart:

ON/OFF-button for turning the robot on and off. When OFF-it will work, but will not make a transaction.

Risk: the Level of risk: 1-Very Low,  2-Low,  3-Medium,  4-High,  5-Extremal.

Drawdown is a physical Stop Loss, % of the balance (drawdown on funds), at which the position is closed.

Close-Closes the position of the corresponding symbol.

 The graph shows some information lines:

Lot – The minimum lot for opening an order. It is determined automatically, depending on the selected risk and the size of the balance.

V = xxx(Vmax) – Indicates the current rate of price change (xxx), taking into account the acceleration. Vmax – maximum speed. When the current speed is higher than Vmax, the order is not opened.

 EVENT: specifies the next action. The following events are available:  “Opening an order” , “Closing by TP”,  “Lot increase”,  “Closing by TP(Incr)”, “Closing by SL”. 

Level = xxx(Lmax)-xxx – the current level, Lmax-the maximum level for the breakdown. When the current level exceeds Lmax, an event occurs that shows EVENT.

Entry % = xxx(Pmax) – xxx-the current percentage of the reversal from the level. Pmax is the maximum percentage. When the current percentage exceeds the Pmax value, an event occurs that shows EVENT.

Bitcoin Robot trades mainly on BTCUSD, as well as on all currency pairs, all trading accounts, and all time frames.

I recommend using it for BTCUSD and EURUSD.

For large accounts, I recommend using the risk mode 1-Very Low.

The minimum Deposit is $500, it is recommended that $2000 and above.  

Leverage of 1: 25 – 1: 500. For small deposits of 1:500 and above. 

The robot can simultaneously work up to 10-12 and above currency pairs.

To find profitable currency pairs, you need to test the robot in the “All symbols selected in MarketWatch” mode, in the “Every tick based on real ticks“mode.

The robot can simultaneously work up to 10-12 and above currency pairs.

To find profitable currency pairs, you need to test the robot in the “All symbols selected in MarketWatch” mode, in the “Every tick based on real ticks“mode.

With the goal of security, there is a limit on the number of simultaneously open positions, for the mode Very Low: 5-6, Low:4-5, Medium: 3-4, High: 2-3, Extreme: 1-2

The lot is not automatically increased if the Margin Level is below 2000% .

With the goal of security, there is a limit on the number of simultaneously open positions, for the mode Very Low: 5-6, Low:4-5, Medium: 3-4, High: 2-3, Extreme: 1-2

The lot is not automatically increased if the Margin Level is below 2000% .

All control buttons are shown in screenshot 1

If there are open orders on MT5 and to transfer the account to another MT5 terminal, before installing the robot, you need to copy all the files from the old “Files” folder to the new “Files” folder.

The folder is located here: Open menu “File” – > “Open Data Folder” – > > “MQL5” – > > > “Files” ->>>> . . . . (for example “EURUSD. btc” . . . )

In these files (.btc) stores the previous state of the individual pairs.

If there are open orders on MT5 and to transfer the account to another MT5 terminal, before installing the robot, you need to copy all the files from the old “Files” folder to the new “Files” folder.

The folder is located here: Open menu “File” – > “Open Data Folder” – > > “MQL5” – > > > “Files” ->>>> . . . . (for example “EURUSD. btc” . . . )

In these files (.btc) stores the previous state of the individual pairs.

 

Author

Petros Shatakhtsyan is an expert in the development of automated trading systems with more than a decade of experience in the Forex market.

[/spoiler]

Add review
Reviews ( 0 ):